Physical:

• 302 mm (11.9 in.)
• Width (across yoke):302 mm (11.9 in.)
• Height (head straight up):360 mm (14.2 in.)
• Weight (without accessories):6.5 kg (14.4 lbs.)

Dynamic Effects:

• Beam color mixing:RGBW
• Aura (secondary lens array illumination) color mixing:RGB
• Beam color temperature control:CTO, variable 10 000 - 2500 K
• Beam and aura electronic 'color wheel' effect:33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
• Beam and aura independent shutter effects:Electronic, with regular and random pulse, burst and strobe effects
• Pre-programmed effects:Range of independent and synchronized Beam and Aura FX, two combinable
• Electronic dimming:Independent beam and aura, four dimming curve options
• Zoom:10° - 60° (one-tenth peak angle)
• Pan:540°
• Tilt:232°
• Pan and tilt speed:Adjustable via onboard control panel and DMX

Control and Programming:

• Control options:Independent or synchronized Beam and Aura control
• Control system:DMX, RDM
• Control resolution:8-bit, with 16-bit control of pan & tilt
• DMX channels:14/25
• Setting and addressing:Control panel with backlit graphic display
• DMX compliance:USITT DMX512-A
• RDM compliance:ANSI/ESTA E1.20
• Transceiver:RS-485
• Firmware update:Via DMX with Martin™ USB Duo DMX Interface Box

Optics and Photometric Data:

• Light source:15 W RGBW array system
• LED refresh rate:Beam 1200 Hz, Aura 4395 Hz
• Minimum LED lifetime:50 000 hours (to >70% luminous output)*
• Total luminous output (wide, one-tenth peak):6.0 Klm
• Total luminous output (narrow, one-tenth peak):4.3 Klm
• Video compatibility:Designed for use with HD/high-speed video cameras

Construction:

• Color:Black
• Housing:High-impact thermoplastic, flame-retardant to UL 94 5VA
• Protection rating:IP20

Installation:

• Mounting points:M12 hole for rigging clamp, attachment points for surface-mounting bracket
• Orientation:Any
• Minimum distance to combustible materials:200 mm (8 in.) from fixture
• Minimum distance to illuminated surfaces:1 m (3 ft. 4 in.) from fixture
• Location:Indoor use only, must be fastened to surface or structure

Connections:

• AC power:Neutrik PowerCON TRUE1 NAC3PX dual socket
• AC power input socket:Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
• AC power thru socket:Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
• DMX data in/out:5-pin locking XLR

Electrical:

• Maximum power consumption:400 W
• Power supply unit:Auto-ranging electronic switch mode
• AC power:100-240 V nominal, 50/60 Hz
• Typical half-cycle RMS inrush current:10.7 A
• Power consumption, all effects static, zero light output:<25 W

Typical Power and Current:

• 100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
• 120 V, 60 Hz:355 W, 3.2 A, PF 0.99
• 208 V, 60 Hz:350 W, 1.8 A, PF 0.97
• 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
• 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

• Cooling:Forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.):40° C (104° F)
• Minimum ambient temperature (Ta min.):5° C (41° F)
• Total heat dissipation (calculated, +/- 10%):1230 BTU/hr.