Power:

• AC power: 100-240 V AC nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 7,0 A
• Typical earth-leakage current: 0,43 mA
• Power Factor: 0,99 @ 100 V / 120 V , 0,97 @ 208 V / 230 V / 240 V
• Max current draw: 3,9 A @ 100 V / 120 V , 1,8 A @ 208 V / 230 V / 240 V
• Typical current draw: 2,9 A @ 100 V , 2,4 A @ 120 V , 1,4 A @ 208 V , 1,3 A @ 230 V , 1,2 A @ 240 V
• Maximum: 340 W
• Typical: 292 W
• Idle: 47 W
• Hibernation: 32 W

Optical:

• Front Lens Diameter: 196 mm (7,72 in.)
• Zoom Range: 1:6
• Full Zoom Range at Half Peak (Beam Angle): 6,3° - 35,3°
• Full Zoom Range at Tenth Peak (Field Angle): 8,8° - 50,4°
• Beam Light Source: 7 x 60 W RGBW LED
• Aura Light Source: 12 x 4 W RGBW LED
• Total Beam LED Engine Power: 296,5 W
• Total Aura LED Engine Power: 35,1 W
• Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)

Effects:

• Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
• Beam Dimming options: Choice of four dimming curves
• Beam Color Mixing: RGB, independently variable 0 - 100%
• Beam Color Temperature Control: Variable 1.000 – 12.850 K
• Beam Tint Control: Variable green-magenta shift Δuv -0,05 – +0,05
• Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
• Zoom: Motorized with 1:6 zoom ratio
• Pan: Motorized 540°
• Tilt: Motorized 220°
• Beam PixelMapping: Individual RGB control of each of the 7 Beam pixels
• Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
• Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe, instant open and blackout
• Aura Dimming options: Choice of four dimming curves
• Aura Color Mixing: RGB, independently variable 0 - 100%
• Aura Color Temperature Control: Variable 1.000 – 12.850 K
• Aura Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
• Aura Virtual Color wheel: 48 color presets, continuous rotation & random color
• Aura PixelMapping: Individual RGB control of each of the 12 Aura filaments
• Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
• Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined
• LED Frequency control: Variable LED PWM control

Heat management:

• Cooling: Forced air (temperature regulated, low noise, user-definable levels)
• Total heat dissipation (calculated, +/- 10%): 972 BTU/hr.
• Maximum surface temperature, steady state, at 40° C ambient: 60° C (140° F)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)

Control and programming:

• Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3
• Protocol Detection: Automatic
• DMX Modes: Compact, Basic, Extended & Ludicrous
• DMX Channels: 20, 36, 57 & 93
• 16-bit Controllable Parameters: Beam & Aura Dimming, Beam Color Mixing, Zoom, Pan and Tilt
• Setting and Addressing: Display Menu, RDM, RDM over Art-Net or P3
• Local User Interface: Backlit LCD Display with battery-powered operation
• Fixture identification: User-settable ID number
• DMX Compliance: USITT DMX512-A
• RDM Compliance: ANSI/ESTA E1.20
• Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
• sACN Compliance: ANSI E1.31 – 2016
• Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
• Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using Martin Companion / P3 System Controller

Photometric:

• Light Engine Luminous Output: 11.000 lumens
• Fixture Luminous Output Wide: 6.000 lumens
• Fixture Luminous Output Narrow: 4.500 lumens
• Peak Luminous Intensity Narrow: 360.000 cd
• CCT: Variable 1.000 K – 12.850 K (+/- 200 K)
• CRI (Color Rendering Index) high output mode: ≥ 71
• CRI (Color Rendering Index) high quality mode: ≥ TBC
• CQS (Color Quality Scale) high output mode: ≥ 80
• CQS (Color Quality Scale) high quality mode: ≥ TBC
• TM-30 Rf (IES TM-30-15 Fidelity Index) high output mode: ≥ 78
• TM-30 Rf (IES TM-30-15 Fidelity Index) high quality mode: ≥ TBC
• TM-30 Rg (IES TM-30-15 Gamut Index) high output mode: ≥ 117
• TM-30 Rg (IES TM-30-15 Gamut Index) high quality mode: ≥ TBC
• TLCI (Television Lighting Consistency Index) high output mode: ≥ 57
• TLCI (Television Lighting Consistency Index) high quality mode: ≥ TBC
• Beam LED Refresh Rate: Variable 2.400 Hz – 3.000 Hz and 24.000 Hz mode
• Aura LED Refresh Rate: 1.200 Hz
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration of Beam and Aura
• Color Modes: Extended Color Mode and Calibrated Color Mode

Connectors:

• Firmware from flash memory: USB 2.0 type C port
• AC mains power in/thru: Neutrik powerCON TRUE1 TOP
• DMX and RDM data in/thru: Neutrik 5-pin locking XLR TOP
• Ethernet (Art-Net, sACN and P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP

Installation:

• Mounting points: 2 pairs of 1/4-turn points for 106 mm (4,17 in.) center-to-center omega brackets and single M12 threaded hole
• Location: Indoor or Temporary Outdoor use
• Orientation: Any, except with display facing upwards in outdoor application
• Minimum distance to combustible materials: 0,2 m (7,87 in.)
• Minimum distance to illuminated surfaces: 1,0 m (39,37 in.)

Housing:

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Protection rating: IP54

Physical:

• Width (across yoke): 338 mm (13,31 in.)
• Width (base): 306 mm (12,05 in.)
• Height (head straight up): 380 mm (14,96 in.)
• Height (maximum): 421 mm (16,57 in.)
• Depth (head): 205 mm (8,07 in.)
• Depth (base): 226 mm (8,90 in.)
• Minimum center-to-center distance in side-by-side installation: 350 mm (13,78 in.)
• Weight: 8,95 kg (19,73 lbs.)

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 21,3 lm/W
• LWR: 670 lm/kg (304 lm/lbs.)