Electrical:

• AC power: 208-250 V AC nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 20,0 A
• Power Factor: 0,96 @ 208 V / 220 V /230 V / 240 V
• Typical current draw: 17,8 A @ 208 V , 16,9 A @ 220 V , 15,6 A @ 230 V , 15,2 A @ 240 V *

Power Consumption:

• Maximum: 3.500 W
• Typical: 3.350 W
• Idle: 10 W

Performance:

• Coverage volume: 80 m3 (2.825 ft3) minute
• Fluid consumption, continuous maximum output: 70 ml minute
• Ready time (minimum): 5-minutes
• Ready time (optimal): 7-minutes
• Continuous effect output

Control and Programming:

• DMX channels: 1/2
• DMX compliance: ANSI E1.11 - USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20 RDM
• Control options: Integrated digital remote control, fast access keypad, DMX/RDM, master/client
• Control parameters: Continuous or timer-controlled output
• Low-Fog/Fan: Proportionally controlled output, 0-100%
• Setting and addressing: Control panel with backlit LCD display and 6-button user interface or via RDM

Construction:

• Housing: Steel
• Color: Black
• Portability: Removable castors
• Protection rating: IP20
• Heat exchanger: 2.500 W, thermally protected
• Fluid pump, low-fog fluid: Oscillating piston, high-pressure
• Fluid pump, waste condensate: Peristaltic pump, low-pressure
• Fluid management, low-fog fluid: Fluid out sensing, sealed for transportation
• Fluid management, waste condensate: Visual sight gauge, LED illuminated reservoir
• Fluid reservoir, low-fog fluid: 5 l drop-in reservoir w/ quick connect fitting or external source
• Fluid reservoir, waste condensate: 0,5 l drop in reservoir w/ quick connect fitting or external source
• Refrigeration: Closed loop system, variable speed condenser fans, electronic expansion valve
• Refrigeration control: PWM electronic control
• Remote Control: Integrated digital remote with 5 m (16,4 ft.) cable, 3-pin XLR
• Remote Control Cable Length (max.): 25 m (82 ft.)
• Optional Ducting Kit: Black, steel, triple ducting adaptor with 3x 5 m (16.4 ft.) 150 mm (6 in.) OD flexible ducting hoses and includes 3x stainless steel duct clamps, worm drive, hex screw
• Optional Fog Blade: Black, steel, 150 mm (6 in.) outlet, includes 1x stainless steel duct clamp, worm drive, hex screw
• Optional External Fluid Kit: 25 l sealed fluid reservoir, 1,5 m (4,9 ft.) 8 mm OD, 6 mm ID, silicone tubing, pipetta fitting
• Optional Softcover: Black, heavy duty PVC external, brushed nylon padding interior, hook and loop fastener system, 5 in. x 8 in. transparent PAL transit pocket

Installation:

• Location: Dry location only
• Orientation: Horizontal Only
• Clearance around machine: 60 cm (24 in.)
• Ducting: Optional, max length 10 m (32,8 ft.)

Connections:

• AC Power: Hardwired flexible mains cable, 3 x 4,0 mm2 (6 AWG), 3,3 m (10,8 ft.)
• DMX/RDM in/out: 3- and 5-pin locking XLR
• Remote control: 3-pin locking XLR
• Firmware: AVR socket
• Fluid inlet, low-fog fluid: Brass barbed hose tail, 6 mm
• Fluid outlet, waste: Brass barbed hose tail, 6 mm

Acoustic:

• Noise level average, maximum low-fog output: 62,76 dBa
• Noise level average, standby: 40,47 dBa

Thermal:

• Cooling: Forced air, low noise
• Total heat dissipation, idle (calculated, +/- 10%): 2.241 BTU/hr.
• Total heat dissipation, full load (calculated, +/- 10%): 11.430 BTU/hr.
• Maximum ambient temperature (Ta max.): 35° C (95° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Exterior surface temperature, steady state: 30° C (86° F)

Physical:

• Length: 785 mm (30,91 in.)
• Width: 648 mm (25,52 in.)
• Height: 769 mm (30,29 in.)
• Height without castors: 636 mm (25,06 in.)
• Weight, dry: 124 kg (274 lb.)
• Weight, filled: 129 kg (285 lb.)