Mittwoch, 02 Mai 2018 00:00

HDMI20-OPTC-TX220-Pro & RX220-Pro

The HDMI20-OPTC-TX/RX220-Pro is a HDMI 2.0 compatible, HDCP 2.2 compliant extender pair for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4. This extender pair is particularly recommended for rental and staging applications, 4K live events, and for future-proof operation centers. The extender can transmit HDMI 2.0 signals with 18Gbps over one multimode fiber to a distance of up to 700 meters*. Video and Ethernet signals are transferred over a single optical line.

Using the factory, custom or transparent EDID emulation the user can fix and lock EDID data on the HDMI connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming to the system requirements. The unit offers bi-directional and transparent RS-232 transmission and two separate Gigabit Ethernet signals over the fiber connection.

All devices can be mounted on a rack shelf or used standalone, rack ears also serve easy handling and bump protection, mounting threads on top and one of the sides to conform strict installation safety regulations.

The device features Pixel Accurate Reclocking, a Lightware technology to eliminate jitter and skew generated by low quality sources and multiple daisychained devices. Single fiber technology makes these units fully HDMI compliant without need of a second fiber cable or copper connections. Galvanic isolation between source and display helps avoiding ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without frame latency. This feature is crucial in 3D applications and systems where audio is processed separately.

Lightware’s HDMI20-OPTC series supports both HDR10 and Dolby Vision in the HDMI signal at 10 or 12 bit speeds respectively, within its frame bandwidth of 18 Gbps maximum.

 

 


  • Resolutions up to 4k@60Hz with RGB 4:4:4 colorspace
  • Video and Ethernet signal extension over a single optical line
  • 18 Gbps bandwidth
  • HDMI 2.0, HDMI 1.x and DVI 1.0 compliant
  • HDCP 2.2 compliant
  • Splitting of 4K UHD at 60Hz to two output ports with left half and right half of the original video*
  • 36-bit deep color support
  • 3D signal compatibility with frame packing, side-by-side and top-bottom formats
  • HDR and Dolby Vision support*
  • 2x HDMI inputs for main/backup sources with autoswitch*
  • Supports all HDMI audio formats: Dolby TrueHD and DTS-HD Master Audio
  • 2x Gigabit Ethernet (control for both outputs)
  • Ethernet and USB control options
  • Pixel Accurate Reclocking on each input
  • Advanced EDID Management
  • Color graphic LCD and jog dial push button for front panel control on TX side
  • Lightware Device Controller software control over Ethernet and USB
  • Third party control with LW3 protocol over Ethernet or RS-232
  • Firmware upgrade with Lightware Device Updater software over Ethernet
  • Neutrik OpticalCON fiber connectors
  • Breakout LC connector for Neutrik OpticalCON Duo
  • Local monitor output on TX side
  • Built-in universal power supply
  • Mounting thread on top and one of the sides and fixed mounting ears for safe and secure installation
  • Handles for rigging and safety wire rope
  • Built-in Event Manager automation feature
  • Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
  • Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
  • HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
  • HDCP 2.2 compliant (transparent pass-through)
  • Bi-directional RS-232 extension (pass-through and control)
  • No signal latency, zero frame delay
  • Single Fiber Technology
  • Dual output with built-in distribution amplifier
  • Advanced EDID Management
  • Command injection on RS-232 and IR ports
  • Front panel LCD menu and buttons for crosspoint control
  • Multiple TCP/IP connections
  • Intuitive control software for device configuration
  • Device control via Ethernet (TCP/IP), RS-232 and USB
  • No video compression
  • Built-in universal power supply
  • Directly mountable in 19" rack
  • Breakout LC connector for Neutrik OpticalCON Duo unused fiber channel
  • EtherCON ruggedized LAN connector
  • Active fan cooling
  • Front to back cooling airflow

The rental price for both HDMI20-OPTC-TX220-Pro & RX220-Pro are €85,- per piece, per day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

 

Preisliste (PDF)

Kontakt

Niederlassung Castrop-Rauxel

Telefon: +49 (0)2305 970 3004
Email: office.castrop@rentall.eu
Adresse:  

Am Förderturm 16
44575 Castrop-Rauxel

 

Niederlassung Nürnberg

Telefon: +49 (0)9114 505 313
Email: office.nuernberg@rentall.eu
Adresse:        

Klingenhofstraße 50
D-90411 Nürnberg