De MAC Encore is de kleinste en lichtste optie op de markt. Door gebruik te maken van witte LEDs met een completer spectrum dan tot op heden op de markt is, zijn natuurgetrouwe kleurweergave van huidtinten, kostuums, decor etc verzekerd. Verder is de MAC Encore flicker-free bij de meest geavanceerde TV en film camera shutter speeds.
De MAC encore is het eerste LED armatuur met uitmuntende licht kwaliteit waardoor nu ook de meest veeleisende situaties over kunnen stappen op LED.
De MAC encore maakt gebruik van een combinatie tussen convectie en forced air koeling waardoor er nauwlijk merkbaar geluid wordt geproduceerd. De MAC Encore is dan ook de stilste Moving Profile op de markt.
Specificaties Martin MAC Encore WRM:
• Pure white LED engine with 3000 K CCT
• A flat field without color temperature variation during zoom and dimming.
• Flicker-free operation—LED driver frequency suitable for all camera applications.
• Ultra-low noise—Combines convection and forced air cooling with user-selectable output vs. sound level control.
• Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
• Vibrant CMY color mixing with a superior palette of colors ranging from light and smooth pastel shades to rich, saturated primaries.
• Variable CTB—tungsten to daylight CCT control and expansion of the CMY palette that stays true to the black body curve.
• Color wheel—6 interchangeable dichroic filters + open.
• 1:4 zoom—precise and fast, silent zoom with auto- linked focus.
• Four framing shutter blades with individual +/- 30° adjustment and entire system rotation of +/- 55° allow for high-precision cue repeats.
• Five rotating glass gobos with next to zero focal separation from the framing system.
• Animation wheel with continuous multi-directional rotation and indexing with variable angle, speed and direction.
• Animotion™ FX System—internal dimming effect macros for stunning 3D mid-air and projection effects.
• Precise and tight iris with adjustable dynamic effects.
• Soft frost—a light frost that leaves gobo artwork and framed images visible with a beautiful soft edge.
• Heavy frost available as an optional accessory.
• Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
Physical Length: 452 mm (17.8 in.)
Width (across yoke): 480 mm (18.9 in.)
Height (maximum): 740 mm (29.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: Variable 3000 - 7000K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction
Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
Iris: Variable 0 - 100%
Frost: Variable 0 - 100%
Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options: Choice of four dimming curvesPre-programmed effects: Two ranges of FX, independent or synchronized/combined
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Zoom: Motorized
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
DMX channels: 38
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
Movement control options: Tracking and vector
Fixture identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
Light source: 3000 K white LEDs
Total LED engine power: 468W
Minimum LED lifetime: 50 000 hours (to >80% luminous output)*
Zoom range: 12° - 48° one-tenth peak (1:4)
*Figure obtained under manufacturer's test conditions
Light engine luminous output: ≥ 31 500 lumens
Fixture luminous output: 9200 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >90
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >90
Color: Black
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power consumption, all effects static, zero light output: 64W
Half-cycle RMS inrush curent at 230 V, 50 Hz: 10.3 A
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity.
Allow for a deviation of +/- 10%. PF = power factor
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr
Specificaties Martin MAC Encore CLD:
- Pure white LED engine with 6000 K CCT
- A flat field without color temperature variation during zoom and dimming.
- Flicker-free operation—LED driver frequency suitable for all camera applications.
- Ultra-low noise—Combines convection and forced air cooling with user-selectable output vs. sound level control.
- Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
- Vibrant CMY color mixing with a superior palette of colors ranging from light and smooth pastel shades to rich, saturated primaries.
- Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
- Color wheel—6 interchangeable dichroic filters + open.
- 1:4 zoom—precise and fast, silent zoom with auto- linked focus.
- Four framing shutter blades with individual +/- 30° adjustment and entire system rotation of +/- 55° allow for high-precision cue repeats.
- Five rotating glass gobos with next to zero focal separation from the framing system.
- Animation wheel with continuous multi-directional rotation and indexing with variable angle, speed and direction.
- Animotion™ FX System—internal dimming effect macros for stunning 3D mid-air and projection effects.
- Precise and tight iris with adjustable dynamic effects.
- Soft frost—a light frost that leaves gobo artwork and framed images visible with a beautiful soft edge.
- Heavy frost available as an optional accessory.
- Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
Physical Length: 452 mm (17.8 in.)
Width (across yoke): 480 mm (18.9 in.)
Height (maximum): 740 mm (29.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: Variable 6000 - 2700K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction
Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
Iris: Variable 0 - 100%
Frost: Variable 0 - 100%
Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options: Choice of four dimming curves
Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Zoom: Motorized
Pan: 540°
Tilt: 268° Position correction system: Absolute position monitoring
DMX channels: 38
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
Movement control options: Tracking and vector
Fixture identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
Light source: 6000 K white LEDs
Total LED engine power: 468W
Minimum LED lifetime: 50 000 hours (to >80% luminous output)*
Zoom range: 12° - 48° one-tenth peak (1:4)
*Figure obtained under manufacturer's test conditions
Light engine luminous output: ≥ 31 500 lumens
Fixture luminous output: 9200 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >90
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >90
Color: Black
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power consumption, all effects static, zero light output: 64W
Half-cycle RMS inrush curent at 230 V, 50 Hz: 10.3 A
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity.
Allow for a deviation of +/- 10%. PF = power factor
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr
Bekijk HIER het complete overzicht van al onze producten en actuele prijzen of Neem contact op met onze specialisten op telefoonnummer 026 325 5392.