Martin Professional's RUSH MH 6 Wash is an exciting variation of Martin's hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash comes with a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects, and temperature-controlled fan cooling for quiet operation.
Martin Professional RUSH MH 6 Wash Includes:
- RUSH MH 6 Wash LIght Fixture
- Included Items Power cable 1.5 m
- Omega bracket for rigging clamp attachment
Martin Professional RUSH MH 6 Wash Features:
- 12 x 10 W Osram Ostar RGBW LED’s
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 10°–60° zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON in and through
- 3- and 5-pin DMX options
Specifications:
Physical
- Dimensions: Length: 11.4" L x 7.4" W x 14.2" W (290 mm x 189 mm x 360 mm
- Weight: 15.7 lbs (7.1 kg)
Dynamic Effects:
- Color mixing: RGBW
- Color presets: 36 color presets plus full white, ‘color wheel’ effects
- Electronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
- Zoom: Motorized Pan: 540° Tilt: 270°
Control and Programming:
- Control options: DMX
- DMX channels: 14
- White balance control: RGB adjustment
- 16-bit fine control: Dimming, pan, and tilt
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512/1990
Optics:
- Light source: 12 x 10 W RGBW Osram Ostar LEDs
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- Zoom range: 10° - 60° (*Figure obtained under manufacturer's test conditions)
Construction:
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Ingress protection rating: IP20
Installation:
- Mounting points: One quarter-turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to illuminated surfaces: 200 mm (8 in.)
- Minimum distance to combustible materials: 100 mm (4 in.)
- Minimum clearance around fans and vents: 100 mm (4 in.)
Connections:
- AC power in/thru: Neutrik PowerCon
- DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical:
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Fuse: T 3.15 A
- Recommended Miniature Circuit Breaker*: Type D
- *Per IEC 60898/UL489/CSA C22.2 No. 5
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current:
- 120 V, 60 Hz: 1.6 A, 155 W, PF 0.99
- 230 V, 50 Hz: 0.7 A, 155 W, PF 0.95
- Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal:
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
Approvals:
- EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55032, EN 55103-2, EN
- 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15
- Canadian safety: CSA C22.2 No. 166
- Australia/NZ: C-TICK N4241
The rental price of the Martin Rush MH 6 Wash is €70,- for 2 pieces a day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.